ZL104局部阳极氧化工艺研究

研究了铝合金材料阳极氧化理论以及ZL104铝合金材料局部硫酸阳极氧化处理后膜层粘脱现象产生的原因与机理,指出了该现象产生的原因是氧化膜在贮存、水试等环节受到污染而使氧化膜的封孔结构被破坏.根据理论分析和模拟试验结果,提出了局部阳极氧化前增加水封闭处理对氧化膜进行修复的工艺技术.该项技术可有效杜绝氧化膜层粘脱现象.采用该项工艺技术制造的液体火箭发动机已经用于常规运载火箭系统,该运载火箭已经完成飞行任务考核.     

自动配平系统驱动电路故障分析与改进

针对某型飞机配平系统故障，对其原因、危害性进行了详细分析．并采取了措施对系统进行设计改进，解决了系统设计缺陷。     

FPGA设计中的亚稳态问题及其预防方法研究

由于在复杂FPGA（Field Programmable Gate Array,现场可编程门阵列）设计中存在跨时钟域,通常会产生亚稳态现象.为有效地预防和解决该问题,分析FPGA设计中亚稳态的产生机理及其对数字信号处理系统的影响.根据不同的信号同步类型,针对单比特电平信号、脉冲信号和边沿信号,分别给出基于触发器级联的跨时钟域信号同步方法;针对并行信号,提出基于异步FIFO （First In First Out,先进先出队列）和握手协议的跨时钟域同步方法;并通过仿真手段分析信号同步方法的有效性及其适用范围.结果表明：这些方法能够正确有效地完成跨时钟域信号同步,预防可能出现的亚稳态问题,从而提高复杂FPGA设计的可靠性和稳定性.     

Semi-stochastic modification of second-order radial derivative of Abel–Poisson’s formula for validating satellite gravity gradiometry data

The geoid can be used to validate the satellite gravity gradiometry data. Validation of such data is important prior to their downward continuation because of amplification of the data errors through this process. In this paper, the second-order radial derivative of Abel–Poisson’s formula is modified stochastically to reduce the effect of the far-zone geoid and generate the second-order radial derivative of geopotential at 250 km level. The numerical studies over Fennoscandia show that this method yields the gradients with an error of 10 mE and when the long wavelength of geoid is removed from the estimator and restored after the computations (remove–compute–restore) the error will be in 1 mE level. We name this method semi-stochastic modification. The best case scenario is found when the degree of modification of the integral formula is 200 and the long wavelength geoid to degree 100 is removed and restored. In this case the geoid should have a resolution of 15′ × 15′ and the integration should be performed over a cap size of 3°.     

Evolution of periodic orbits near the Lagrangian point L2

A study of the evolution of the periodic and the quasi-periodic orbits near the Lagrangian point L₂, which is located to the right of the smaller primary on the line joining the primaries and whose distance from the more massive primary is greater than the distance between the primaries, in the framework of restricted three-body problem for the Sun–Jupiter, Earth–Moon (relatively large mass ratio) and Saturn–Titan (relatively small mass ratio) systems is made. Two families of periodic orbits around the smaller primary are identified using the Poincaré surface of section method – family I (initially elliptical, gradually becomes egg-shaped with the increase in the Jacobi constant C and elongated towards the more massive primary) and family II (initially egg-shaped orbits elongated towards L₂ and gradually becomes elliptical with the increase in C). The family I in the Sun–Jupiter and Saturn–Titan systems contains two separatrix caused by third-order and fourth-order resonances, while the Earth–Moon system has only one separatrix which is caused by third-order resonances. Also in the Sun–Jupiter and the Saturn–Titan systems, family I merge with family II, around Jacobian constant 3.0393 and 3.0163, respectively, while in the Earth–Moon system, family II evolves separately from two different branches. The two branches merge at C = 3.184515. In the Earth–Moon system, the family II contains a separatrix due to third-order resonances which is absent in the other two systems.     

气膜内冷通道高度对气膜孔流量系数的影响

以一种基于旋流增益的强化换热技术为研究对象,对狭小受限的气膜孔内冷通道中气膜孔的流量系数开展了试验研究.试验中通过改变气膜孔雷诺数Re(4800～26000)、吹风比M(0.36～2.74)、无量纲冷却通道高度h/d(0.33～2.0)等参数,研究了狭小空间的几何结构、流动参数等对单排气膜孔平均流量系数Cd的影响,并得...     

气体润滑弹性波箔片轴承动态特性分析

通过摄动方法并结合气体润滑压力控制Reynolds方程和气膜压力、气膜厚度及箔片变形等变量的Taylor展开式,推导出弹性波箔片轴承气膜动力特性系数计算微分方程组.同时,考虑气体可压缩性等因素,建立气膜厚度、箔片变形和气膜压力三者之间关系的数学模型方程组.运用Newton-Raphson迭代法和有限差分法耦合求解气膜动...     

Research into Configuration and Flow of Wall Oil Film in Bearing Chamber Based on Droplet Size Distribution

The lubrication design and heat transfer determination of bearing chambers in aeroengine require a sufficient understanding of the oil droplet-film interaction and physical characteristic in an oil/air two-phase flow state.The analyses of oil droplet movement,mass and momentum transfer during the impingement of droplet/wall,as well as wall oil film thickness and flow velocity are very important for the bearing chamber lubrication and heat transfer calculation.An integrated model in combination with droplet movement,droplet/wall impact and film flow analysis is put forward initially based on the consideration of droplet size distribution.The model makes a contribution to provide more practical and feasible technical approach,which is not only for the study of droplet-film interaction and physical behavior in bearing chambers with oil/air two-phase flow phenomena,but also useful for an insight into the essence of physical course through droplet movement and deposition,film formation and flow.The influences of chamber geometries and operating conditions on droplet deposition mass and momentum transfer,and wall film thickness and velocity distribution are discussed.The feasibility of the method by theoretical analysis is also verified by the existing experimental data.The current work is conducive to expose the physical behavior of wall oil film configuration and flow in bearing chamber,and also significant for bearing chamber lubrication and heat transfer study under oil/air two-phase flow conditions.     

冲击＋同向对流＋气膜冷却的三维壁温计算与分析

采用Fluent 6.3软件对冲击＋同向对流＋气膜冷却结构的壁温进行了流固耦合传热计算,获得了该复合冷却结构的壁温和冷却效果分布规律,并将计算结果与试验结果进行了对比.结果表明：冲击＋同向对流＋气膜冷却具有壁温分布均匀、冷却效果好等优点.计算结果与试验结果的分布趋势一致,最大相对误差为3.6%.     

降雨对翼型气动性能影响的机理研究

利用计算流体力学软件FLUENT 6.3.26中的拉格朗日离散相模型研究了降雨条件下翼型的气动特性变化,并应用UDF(用户自定义函数)对FLUENT中自带的Wilcox转捩模式进行了修正,对降雨对翼型气动性能的影响机理进行了研究.结果表明,在降雨条件下,翼型表面积聚的水膜层及其表面粗糙度会影响翼型表面的光洁度,引起边界...